A new high performance epoxy adhesive that applies to wet or dry surfaces for complete waterproof bonding. Trust Selleys Aqua Fix to stick when wet even underwater Features: Can be applied to wet and dry surfaces 100% water resistant Use on multiple surfaces Strong durable bonding Sticks and sets underwater Withstands thermal and mechanial shocks Temperature range -15degree (continuous) to 80degree (intermittent) Availble Sizes 24ml syringe Safe to use on Tiles, Metal, Timber, Rubber, Glass, Leather, Most plastics(not for polyethylene, polypropylene) How to use this product Ensure surfaces to be bonded are clean, free of grease, dirt and loose materials. For best results roughen bond area, prior to cleaning. Dispense equal parts onto a clean disposable surface and ix together thoroughly to a uniform colour. Mixed glue remains usable for 1 hour. Apply mixed glue to both surfaces of job then bring together. Do not apply undue strain to bond for 6-8 hours. Hold joint in place using tapes, clamps or weights if necessary for 24 hours. When applying underwater ensure mixed glue is pushed onto surface firmly until the glue displaces water and adheres to surface. Handy tips For Aquariums allow to cure for at least 72 hours, then thoroughly wash out with water, drain and refill before introducing fish. Not approved for contact with drinking water use Selleys Knead-It Aqua. Storage and re-use Place cap from plunger on nozzle for storage Clean up uncured Aqua Repair Glue with acetone (nail polish remover)